Audix Adx-20i

O izdelku

The Audix ADX-20i is a pre-polarized condenser microphone designed to handle a wide variety of clip-on applications. The Audix ADX20i is sonically superior as well as aesthetically pleasing and is ideally suited for saxophone, trombone, trumpet and other brass instruments. With a smooth uniform response over a frequency range of 40 Hz – 20 kHz, the ADX-20i provides a rich, warm sound not typical of microphones this size. It is machined from solid brass and has a low reflective black e-coat finish. The ADX-20i operates on phantom power (9-52 volts) with the optional preamp module APS-910. It may be used in battery mode with optional phantom power adapter (APS-911 not included). The ADX-20i can be utilised with a wireless system. Depending on the brand of wireless and the connector configuration of the instrument body pack, the ADX-20i connector would need to be modified accordingly. Low noise electronic circuitry, and balanced low impedance output allow for interference free performance even with long cable runs. Audix ADX20i Features High tension spring clamp keeps mic in place Multi-position gooseneck Highly accurate sound reproduction For micing Saxophone, trumpet, trombone Clips on to hardware, stands, cabinets for “hard to mic” areas or instruments Also functions as a room ambience microphone for recording or broadcast Audix ADX20i Specifications Transducer Type: Condenser (pre-polarized) Frequency Response: 40 Hz - 20 kHz Polar Pattern: Cardioid Output Impedance: 250 Ohms balanced Open Circuit Sensitivity: 5.2 mV Equivalent Noise Level: 29 dB (A weighted) Signal to Noise Ratio: 65 dB (ref 1k @ 1 Pascal) Power Requirements: 9 - 52v phantom Maximum SPL: 130 dB Cable/Connector: Shielded 6ft cable terminating to a miniature 3 pin XLR-f Phantom Adapter: mini XLR male - XLR male Polarity: Positive voltage on pin, 2 relative to pin 3 of output XLR connector Housing: Machined Brass Gooseneck: Flexible steel Weight: 1.7 oz/4.7 grams (without cable)